ZKN Log deck
Confirmamos la recepción de la consulta no vinculante
Máquina de interés: ZKN Log deck
Empresa:
Kontaktní osoba:
IČO:
Adresa:
Teléfono:
E-mail:
Su pregunta:
Región de destino:
Tan pronto sea posible nos pondremos en contacto con los datos que ha ingresado.
Volver a la página
The driven ZKN log deck (3 m long, 2 m wide) allows transportation of logs with a maximum length of up to 9 m to the MPO log loader. Together with the log loader, it significantly increases the productivity of the entire cutting process and reduces secondary handling times to a minimum. It is capable of handling logs with a total weight of up to 15,000 kg. The horizontal movement of the logs is carried out by means of chains that are independently controlled by hydraulic motors. For safety reasons, we recommend fitting the end of the loader with ZAK stops (see accessories). The log deck can be equipped with a three-meter extension section with separate hydraulic motors. The deck can be easily controlled from a separate control panel by pressing the buttons. The control of individual components of the line can be combined into a larger control panel according to the customer’s requirements. If required to increase load capacity and rigidity, the system can be provided with an additional support (see accessories).
SPECIAL ACCESSORIES
-
ZAK Log stop
It prevents logs from falling out of the deck accidentally. It is recommended as an end stop for every log deck.
-
ZKN/MNY Support
Support for increasing the load capacity (approx. 5 t), stiffness and stability of the log deck. By using the support, the dynamic load of the deck and thus its service life will be significantly increased.
-
ZKN/MNY Extending section
Three-meter powered extending section with separate hydraulic motors. For safety reasons, we recommend providing the end of the loader with ZAK stops; see accessories.
-
The driven ZKN log deck (3 m long, 2 m wide) allows transportation of logs with a maximum length of up to 9 m to the MPO log loader. Together with the log loader, it significantly increases the productivity of the entire cutting process and reduces secondary handling times to a minimum. It is capable of handling logs with a total weight of up to 15,000 kg. The horizontal movement of the logs is carried out by means of chains that are independently controlled by hydraulic motors. For safety reasons, we recommend fitting the end of the loader with ZAK stops (see accessories). The log deck can be equipped with a three-meter extension section with separate hydraulic motors. The deck can be easily controlled from a separate control panel by pressing the buttons. The control of individual components of the line can be combined into a larger control panel according to the customer’s requirements. If required to increase load capacity and rigidity, the system can be provided with an additional support (see accessories).
-
SPECIAL ACCESSORIES
-
ZAK Log stop
It prevents logs from falling out of the deck accidentally. It is recommended as an end stop for every log deck.
-
ZKN/MNY Support
Support for increasing the load capacity (approx. 5 t), stiffness and stability of the log deck. By using the support, the dynamic load of the deck and thus its service life will be significantly increased.
-
ZKN/MNY Extending section
Three-meter powered extending section with separate hydraulic motors. For safety reasons, we recommend providing the end of the loader with ZAK stops; see accessories.
-