ARG 300 plus S.A.F.
Confirmamos la recepción de la consulta no vinculante
Máquina de interés: ARG 300 plus S.A.F.
Nombre:
Teléfono:
E-mail:
Su pregunta:
Región de destino:
Tan pronto sea posible nos pondremos en contacto con los datos que ha ingresado.
Volver a la página
A new unique design. An upgraded version of the legendary ARG 300 model series, manufactured for over 20 years, with a completely new saw blade arm.
The most up to date concept of the cast iron arm creates a closed section that is hollow along its full length at all load-carrying points. This guarantees outstanding stiffness of the entire system, maximum accuracy during cutting and a long service life of the saw blade. All of electrical wiring and coolant distribution are concealed in hollow parts of the arm, which means they are protected from damage. The new concept of the arm also brings a great simplification when changing the saw band or when cleaning the inside of the arm. You just need to open the hinged back cover of the arm and it will stay locked in the upper position. Apart from the new saw arm design, there are many technological adjustments that improve user comfort as well as the quality and durability of the machine.
Exceptionally robust universal band saw is appraised for general use in continuous uninterrupted production plants and in workshops (work on locks, maintenance) as well. Industrial band 27 x 0.9 mm is manufactured in many versions and allows for cutting of wide range of materials, including stainless steel or tool steel. Vice system contributes to versatility of use by providing bilateral continuous setting of the cutting angle within the ranges 60° to the right and 45° to the left. The machine is equipped with high-performance industrial hydraulic unit. Pressing a single switch will execute complete cutting cycle – material clamping, band and cooling system start, cutting, band and cooling stop, arm uplift to the original adjustable position and vice unclamping. All of this in connection with hydraulics-controlled saw band feed into cut significantly increases cutting efficiency, especially in larger series and cutting of full and highquality materials. When you switch to the manual mode you can control all functions separately. Hydraulic unit allows you to set the required pressure of the vice. Maximum cutting efficiency is maintained also thanks to the possibility of setting optimum saw band rate by a frequency converter in the range between 15 and 90 m/min., which significantly contributes to cutting accuracy and service life of saw bands. Large base and massive arm turning system with large loading surfaces ensure exceptional stability of the machine even when cutting heavy workpieces.
- Robust machine framework consisting of castings from grey cast iron ensures vibration absorption.
- Modern concept of the band saw arm allows for large cutting ranges in upright and angular cuts.
- Simple locking and adjusting of the desired cutting angle on the angle scale with stops fixed at 60° to the right and 45° to the left.
- The turntable rotates along with the saw band. Thanks to that the saw band does not cut into the loading surface of the vice.
- Massive quick-clamping vice ensures easy and reliable material clamping
- Large diameter running wheels and precise three-side hardmetal guiding ensure long service life of the band and cutting accuracy.
- Overdesign of running wheel bearings, tensioning wheel system and all rotary parts ensures long service life of the machine
- Noiseless and maintenance-free band drive is provided by an industrial electric motor with worm gearbox.
- The machine is connected to a complete cooling system with a high-performance pump and possibility of regulating the flow on both guiding heads independently. Coolant tank with a pump is placed in the base of the machine.
- The machine checks correct tension or break of the saw band. If the saw band breaks the machine automatically switches off.
- Easy control by ergonomically placed controls (electrical and hydraulics) on the base of the machine.
- The machine is equipped with a hinged stop with a 500mm scale. Hinged system prevents the workpiece from jamming during cutting
| 90° | -45° | +45° | +60° | |
 |
300 | 220 | 240 | 155 |
 |
290 | 195 | 225 | 150 |
 |
375 x 190 | 240 x 100 | 240 x 160 | 150 x 150 |
| Main motor | 400 V, 50 Hz, 2,2 kW |
| Pump motor | 400 V, 50 Hz, 0,05 kW |
| Hydraulic motor unit | 400 V, 50 Hz, 0,55 kW |
| Saw blade speed | 15-90 m/min. |
| Working height of vice | 910 mm |
| Hydraulic system oil | cca 25 l (ISO 6743/4-HM, DIN 51 524 part 2-HLP) |
| Coolant tank | cca 15 l |
| Machine dimensions | Dimension drawing |
| Machine weight | 690 kg |
-
Tope de la pieza de trabajo - equipamiento estandar
Tope robusto con escala de 500 mm para ajustar la longitud necesaria del material a cortar.
-
Convertidor de frecuencia - equipamiento estandar
Permite regular continuamente la velocidad de la cuchilla entre 15-90 m/min. y establecer así las condiciones de corte óptimas para el material de que se trate.
-
Dispositivo de presión hidráulica HVP
Sirve para sujetar el material durante el corte en paquete. Asegura una sujeción fiable mediante una presión vertical controlada hidráulicamente, que funciona en ciclo con toda la máquina.
-
Vertedero de material KL
Une continuamente el tornillo de banco detrás del corte y permite deslizar fácilmente las piezas cortadas en un contenedor cuando se cortan series más grandes. La construcción de la conducto, que consta de 2 partes, evita las fugas del refrigerante.
-
Lámpara halógena LA
Proporciona una buena iluminación del lugar de trabajo de la máquina. Una herramienta invaluable, especialmente cuando la iluminación del lugar de trabajo es insuficiente.
-
Lubricación por neblina de aceite MM
Crea una niebla de aceite que se pulveriza sobre el filo de corte. Sustituye al uso de un refrigerante clásico, especialmente al cortar secciones durante las cuales pueden producirse fugas. Posibilidad de utilizar aceites ecológicos.
-
Alineación láser LS
El láser industrial de alta calidad proyecta la línea de corte sobre el material a cortar. Hace que el ajuste de la longitud de material requerida sea más sencillo, rápido y preciso.
-
Cepillo de limpieza KDM
Cepillo de limpieza de acero, accionado por rueda motriz. Se utiliza para eliminar virutas de la cinta de sierra detrás del corte.
-
Indicador de tensión de la cinta de sierra CD
Garantiza un tensado preciso de la cinta de sierra al valor requerido según el manómetro y su control durante el uso de la máquina. La tensión óptima de la cinta de sierra es esencial para su vida útil y su precisión de corte.
-
Pistola de enjuague OPL
Sirve para limpiar el área de trabajo de la máquina.
-
Electronic arm uplift height setting
On a standard machine, the arm uplift height is adjusted manually on a scale located on the machine’s joint. This version is fitted with a sensor on the machine’s joint. If you set the desired arm uplift height before serial cutting in manual mode, the set arm uplift height is stored in the machine memory after switching the machine to semi-automatic mode. After the workpiece is cut, the arm is automatically raised to the set arm uplift height.
-
Bandeja de acero inoxidable y separador de virutas
La robusta bandeja de acero inoxidable es un complemento opcional que permite equipar la máquina con un separador de virutas. El separador de virutas es un recipiente galvanizado y finamente perforado que sirve para la recolección eficiente de las virutas que pasan por el tamiz en la base. Este recipiente es fácilmente extraíble y se puede limpiar fácilmente fuera de la máquina.
-
Bandeja de acero inoxidable y separador magnético de virutas
La robusta bandeja de acero inoxidable es un complemento opcional que permite equipar la máquina con un separador magnético de virutas. Para virutas especialmente finas que pasan por los tamices en la sierra, se utiliza un separador magnético altamente eficiente. Ahorra tiempo de limpieza y desmontaje del sistema de refrigeración y prolonga la vida útil del refrigerante. Este dispositivo es fácilmente extraíble y se puede limpiar fácilmente fuera de la máquina simplemente retirando las barras magnéticas de la carcasa.
The sawblade replacement
-
A new unique design. An upgraded version of the legendary ARG 300 model series, manufactured for over 20 years, with a completely new saw blade arm.
The most up to date concept of the cast iron arm creates a closed section that is hollow along its full length at all load-carrying points. This guarantees outstanding stiffness of the entire system, maximum accuracy during cutting and a long service life of the saw blade. All of electrical wiring and coolant distribution are concealed in hollow parts of the arm, which means they are protected from damage. The new concept of the arm also brings a great simplification when changing the saw band or when cleaning the inside of the arm. You just need to open the hinged back cover of the arm and it will stay locked in the upper position. Apart from the new saw arm design, there are many technological adjustments that improve user comfort as well as the quality and durability of the machine.
Exceptionally robust universal band saw is appraised for general use in continuous uninterrupted production plants and in workshops (work on locks, maintenance) as well. Industrial band 27 x 0.9 mm is manufactured in many versions and allows for cutting of wide range of materials, including stainless steel or tool steel. Vice system contributes to versatility of use by providing bilateral continuous setting of the cutting angle within the ranges 60° to the right and 45° to the left. The machine is equipped with high-performance industrial hydraulic unit. Pressing a single switch will execute complete cutting cycle – material clamping, band and cooling system start, cutting, band and cooling stop, arm uplift to the original adjustable position and vice unclamping. All of this in connection with hydraulics-controlled saw band feed into cut significantly increases cutting efficiency, especially in larger series and cutting of full and highquality materials. When you switch to the manual mode you can control all functions separately. Hydraulic unit allows you to set the required pressure of the vice. Maximum cutting efficiency is maintained also thanks to the possibility of setting optimum saw band rate by a frequency converter in the range between 15 and 90 m/min., which significantly contributes to cutting accuracy and service life of saw bands. Large base and massive arm turning system with large loading surfaces ensure exceptional stability of the machine even when cutting heavy workpieces.
- Robust machine framework consisting of castings from grey cast iron ensures vibration absorption.
- Modern concept of the band saw arm allows for large cutting ranges in upright and angular cuts.
- Simple locking and adjusting of the desired cutting angle on the angle scale with stops fixed at 60° to the right and 45° to the left.
- The turntable rotates along with the saw band. Thanks to that the saw band does not cut into the loading surface of the vice.
- Massive quick-clamping vice ensures easy and reliable material clamping
- Large diameter running wheels and precise three-side hardmetal guiding ensure long service life of the band and cutting accuracy.
- Overdesign of running wheel bearings, tensioning wheel system and all rotary parts ensures long service life of the machine
- Noiseless and maintenance-free band drive is provided by an industrial electric motor with worm gearbox.
- The machine is connected to a complete cooling system with a high-performance pump and possibility of regulating the flow on both guiding heads independently. Coolant tank with a pump is placed in the base of the machine.
- The machine checks correct tension or break of the saw band. If the saw band breaks the machine automatically switches off.
- Easy control by ergonomically placed controls (electrical and hydraulics) on the base of the machine.
- The machine is equipped with a hinged stop with a 500mm scale. Hinged system prevents the workpiece from jamming during cutting
-
90° -45° +45° +60° 300 220 240 155 290 195 225 150 375 x 190 240 x 100 240 x 160 150 x 150 Main motor 400 V, 50 Hz, 2,2 kW Pump motor 400 V, 50 Hz, 0,05 kW Hydraulic motor unit 400 V, 50 Hz, 0,55 kW Saw blade speed 15-90 m/min. Working height of vice 910 mm Hydraulic system oil cca 25 l (ISO 6743/4-HM, DIN 51 524 part 2-HLP) Coolant tank cca 15 l Machine dimensions Dimension drawing Machine weight 690 kg -
-
-
Tope de la pieza de trabajo - equipamiento estandar
Tope robusto con escala de 500 mm para ajustar la longitud necesaria del material a cortar.
-
Convertidor de frecuencia - equipamiento estandar
Permite regular continuamente la velocidad de la cuchilla entre 15-90 m/min. y establecer así las condiciones de corte óptimas para el material de que se trate.
-
Dispositivo de presión hidráulica HVP
Sirve para sujetar el material durante el corte en paquete. Asegura una sujeción fiable mediante una presión vertical controlada hidráulicamente, que funciona en ciclo con toda la máquina.
-
Vertedero de material KL
Une continuamente el tornillo de banco detrás del corte y permite deslizar fácilmente las piezas cortadas en un contenedor cuando se cortan series más grandes. La construcción de la conducto, que consta de 2 partes, evita las fugas del refrigerante.
-
Lámpara halógena LA
Proporciona una buena iluminación del lugar de trabajo de la máquina. Una herramienta invaluable, especialmente cuando la iluminación del lugar de trabajo es insuficiente.
-
Lubricación por neblina de aceite MM
Crea una niebla de aceite que se pulveriza sobre el filo de corte. Sustituye al uso de un refrigerante clásico, especialmente al cortar secciones durante las cuales pueden producirse fugas. Posibilidad de utilizar aceites ecológicos.
-
Alineación láser LS
El láser industrial de alta calidad proyecta la línea de corte sobre el material a cortar. Hace que el ajuste de la longitud de material requerida sea más sencillo, rápido y preciso.
-
Cepillo de limpieza KDM
Cepillo de limpieza de acero, accionado por rueda motriz. Se utiliza para eliminar virutas de la cinta de sierra detrás del corte.
-
Indicador de tensión de la cinta de sierra CD
Garantiza un tensado preciso de la cinta de sierra al valor requerido según el manómetro y su control durante el uso de la máquina. La tensión óptima de la cinta de sierra es esencial para su vida útil y su precisión de corte.
-
Pistola de enjuague OPL
Sirve para limpiar el área de trabajo de la máquina.
-
Electronic arm uplift height setting
On a standard machine, the arm uplift height is adjusted manually on a scale located on the machine’s joint. This version is fitted with a sensor on the machine’s joint. If you set the desired arm uplift height before serial cutting in manual mode, the set arm uplift height is stored in the machine memory after switching the machine to semi-automatic mode. After the workpiece is cut, the arm is automatically raised to the set arm uplift height.
-
Bandeja de acero inoxidable y separador de virutas
La robusta bandeja de acero inoxidable es un complemento opcional que permite equipar la máquina con un separador de virutas. El separador de virutas es un recipiente galvanizado y finamente perforado que sirve para la recolección eficiente de las virutas que pasan por el tamiz en la base. Este recipiente es fácilmente extraíble y se puede limpiar fácilmente fuera de la máquina.
-
Bandeja de acero inoxidable y separador magnético de virutas
La robusta bandeja de acero inoxidable es un complemento opcional que permite equipar la máquina con un separador magnético de virutas. Para virutas especialmente finas que pasan por los tamices en la sierra, se utiliza un separador magnético altamente eficiente. Ahorra tiempo de limpieza y desmontaje del sistema de refrigeración y prolonga la vida útil del refrigerante. Este dispositivo es fácilmente extraíble y se puede limpiar fácilmente fuera de la máquina simplemente retirando las barras magnéticas de la carcasa.
-
-
The sawblade replacement