Xpert 3.3 3D
Confirmamos la recepción de la consulta no vinculante
Máquina de interés: Xpert 3.3 3D
Empresa:
Kontaktní osoba:
IČO:
Adresa:
Teléfono:
E-mail:
Su pregunta:
Región de destino:
Tan pronto sea posible nos pondremos en contacto con los datos que ha ingresado.
Volver a la página
THE BAND SAW MACHINE IS THE FASTEST, CHEAPEST AND MOST EFFECTIVE SOLUTION DESIGNED FOR THE DIVISION OF 3D PRINTED METAL PARTS FROM THE BASE PLATE.
This single-purpose robust two-column band saw ensures a fast and precise division of the 3D printer product from the printing plate. The cutting accuracy is 0.2 mm in all directions, the cutting width is approximately 1.7 mm.
A special adjustable printing plate clamping system ensures optimal fixation. It is equipped with a tipping mechanism with stops. This allows easy and fast clamping of the printing plate in the horizontal position and simple tipping to the vertical working position via hydraulic power. Precise clamping of the printing plate ensures a cut setting with minimum allowances, which saves material when printing. The distance between the cut and the base plate is set automatically. The printing plate moves on the linear guiding using a hydraulic cylinder. The complete cutting process with printing plate folding and feeding is made automatically.
The maximum printing plate size is 350 x 350 mm.
The continuously adjustable jaw of the clamping system allows the installation of a 10 - 60 mm thick printing plate.
The machine is seated on an innovative base, which was designed with an emphasis not only on sufficient stability but also on minimum size (the base width is only 850 mm).
The machine is characterized by its overall robust design. Its base consists of a stable machine pedestal with the printing plate clamping system and a two-column fitting system of the arm that moves on linear guiding. The saw blade arm moves on the linear guiding using a hydraulic cylinder driven by a powerful hydraulic unit. The unique saw blade arm is fitted with orbital cast-iron wheels with a massive fit, driven by an industrial motor with a worm gearbox. All this guarantees long-term cutting precision and the service life of the machine. The machine features simple operation on a central control panel and an infinitely adjustable feed rate into the cut. After the execution of the cut, the saw blade automatically turns off and its arm moves up to the original, adjustable position.
The cutting tool used is an industrial Bi-metal saw blade of the size 34 x 1.1 mm. The precision of the cut is guaranteed by a three-sided hard metal guiding. Maximum cutting efficiency is maintained also thanks to the possibility of setting optimum saw band speed by a frequency converter in the range between 20-130 m/min., which significantly contributes to cutting accuracy and service life of the saw bands.
The lighting of cutting is solved by an LED lamp.
The machine can be modified according to the customer's requests.
All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
| Max. width and height of the printing plate | 350 x 350 mm |
| Main motor | 400 V, 50 Hz, 3 kW |
| Hydraulic unit motor | 400 V / 50 Hz / 0,55 kW |
| Saw blade speed | 20-130 m/min. |
| Operating vice height | 860 mm |
| Oil in the hydraulic system | cca 25 l (ISO 6743/4-HM, DIN 51 524 part 2-HLP) |
| Machine dimensions | 1450 x 2500 x 1970 mm |
| Machine weight | 1160 kg |
-
Cepillo de limpieza eléctrico KDE
Cepillo circular de acero accionado por un motor industrial con engranaje helicoidal. Se utiliza para eliminar virutas de la cinta de sierra detrás del corte.
-
Indicador de tensión de la cinta de sierra CD
Garantiza un tensado preciso de la cinta de sierra al valor requerido según el manómetro y su control durante el uso de la máquina. La tensión óptima de la cinta de sierra es esencial para su vida útil y su precisión de corte.
-
Lubricación por neblina de aceite MM
Crea una niebla de aceite que se pulveriza sobre el filo de corte. Sustituye al uso de un refrigerante clásico, especialmente al cortar secciones durante las cuales pueden producirse fugas. Posibilidad de utilizar aceites ecológicos.
-
Suction box
The suction box helps to exclude dust and chips from the cutting area. Suctioning is divided into two branches. The connection hole for powerful suction device has a diameter of 50 mm.
With a printing plate size of 250x250x20mm, the maximum printing height is 300mm
With a printing plate size of 300x300x20mm, the maximum printing height is 250mmThis accessory cannot be combined with the following accessories: Cooling of the saw blade and Cleaning brush
-
Cooling of the saw blade
Cooling of the saw blade prolongs the lifetime of the blade, removes chips, and contributes to a higher cut quality. The coolant pump starts up together with the saw blade. The amount of emulsion is dosed by a valve on the guiding heads. The emulsion is returned to the system through the waste container.
This accessory cannot be combined with the following accessories: Suction box
-
Handling table
Table enables easy manipulation with heavy print plates between 3D printer and saw. Electric drive ensures adjusting of the table height.
-
THE BAND SAW MACHINE IS THE FASTEST, CHEAPEST AND MOST EFFECTIVE SOLUTION DESIGNED FOR THE DIVISION OF 3D PRINTED METAL PARTS FROM THE BASE PLATE.
This single-purpose robust two-column band saw ensures a fast and precise division of the 3D printer product from the printing plate. The cutting accuracy is 0.2 mm in all directions, the cutting width is approximately 1.7 mm.
A special adjustable printing plate clamping system ensures optimal fixation. It is equipped with a tipping mechanism with stops. This allows easy and fast clamping of the printing plate in the horizontal position and simple tipping to the vertical working position via hydraulic power. Precise clamping of the printing plate ensures a cut setting with minimum allowances, which saves material when printing. The distance between the cut and the base plate is set automatically. The printing plate moves on the linear guiding using a hydraulic cylinder. The complete cutting process with printing plate folding and feeding is made automatically.
The maximum printing plate size is 350 x 350 mm.
The continuously adjustable jaw of the clamping system allows the installation of a 10 - 60 mm thick printing plate.
The machine is seated on an innovative base, which was designed with an emphasis not only on sufficient stability but also on minimum size (the base width is only 850 mm).
The machine is characterized by its overall robust design. Its base consists of a stable machine pedestal with the printing plate clamping system and a two-column fitting system of the arm that moves on linear guiding. The saw blade arm moves on the linear guiding using a hydraulic cylinder driven by a powerful hydraulic unit. The unique saw blade arm is fitted with orbital cast-iron wheels with a massive fit, driven by an industrial motor with a worm gearbox. All this guarantees long-term cutting precision and the service life of the machine. The machine features simple operation on a central control panel and an infinitely adjustable feed rate into the cut. After the execution of the cut, the saw blade automatically turns off and its arm moves up to the original, adjustable position.
The cutting tool used is an industrial Bi-metal saw blade of the size 34 x 1.1 mm. The precision of the cut is guaranteed by a three-sided hard metal guiding. Maximum cutting efficiency is maintained also thanks to the possibility of setting optimum saw band speed by a frequency converter in the range between 20-130 m/min., which significantly contributes to cutting accuracy and service life of the saw bands.
The lighting of cutting is solved by an LED lamp.
The machine can be modified according to the customer's requests.
All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
-
Max. width and height of the printing plate 350 x 350 mm Main motor 400 V, 50 Hz, 3 kW Hydraulic unit motor 400 V / 50 Hz / 0,55 kW Saw blade speed 20-130 m/min. Operating vice height 860 mm Oil in the hydraulic system cca 25 l (ISO 6743/4-HM, DIN 51 524 part 2-HLP) Machine dimensions 1450 x 2500 x 1970 mm Machine weight 1160 kg -
-
Cepillo de limpieza eléctrico KDE
Cepillo circular de acero accionado por un motor industrial con engranaje helicoidal. Se utiliza para eliminar virutas de la cinta de sierra detrás del corte.
-
Indicador de tensión de la cinta de sierra CD
Garantiza un tensado preciso de la cinta de sierra al valor requerido según el manómetro y su control durante el uso de la máquina. La tensión óptima de la cinta de sierra es esencial para su vida útil y su precisión de corte.
-
Lubricación por neblina de aceite MM
Crea una niebla de aceite que se pulveriza sobre el filo de corte. Sustituye al uso de un refrigerante clásico, especialmente al cortar secciones durante las cuales pueden producirse fugas. Posibilidad de utilizar aceites ecológicos.
-
Suction box
The suction box helps to exclude dust and chips from the cutting area. Suctioning is divided into two branches. The connection hole for powerful suction device has a diameter of 50 mm.
With a printing plate size of 250x250x20mm, the maximum printing height is 300mm
With a printing plate size of 300x300x20mm, the maximum printing height is 250mmThis accessory cannot be combined with the following accessories: Cooling of the saw blade and Cleaning brush
-
Cooling of the saw blade
Cooling of the saw blade prolongs the lifetime of the blade, removes chips, and contributes to a higher cut quality. The coolant pump starts up together with the saw blade. The amount of emulsion is dosed by a valve on the guiding heads. The emulsion is returned to the system through the waste container.
This accessory cannot be combined with the following accessories: Suction box
-
Handling table
Table enables easy manipulation with heavy print plates between 3D printer and saw. Electric drive ensures adjusting of the table height.
-