CTR 750 GX MOBIL
We confirm receipt of noncommittal demand
Demanded machine: CTR 750 GX MOBIL
Firstname:
Phone:
E-mail:
Your inquiry:
Destination country:
We will contact you as soon as possible using given contact details.
Back to website
Feed into the cut and back - hand-operated
Arm height adjustment - manual
Control panel - on a mobile bridge
Log handling - manual
Maximal log length: 4,2 m
The machine is mounted on a stable trailer that allows easy transport of the machine to the sawing location. The total weight of CTR 750 GX mobil with a trailer is 661 kg.
Check your vehicle’s registration card for the maximum permissible trailer weight!
The trailer is fitted with six robust, infinitely adjustable support legs. These ensure stability both when loading and handling the log and during the sawing itself. Easy loading of the log onto the loading area of the machine using a manual winch and a ramp for log loading (accessory). The trailer is homologated, including the complete machine. The standard length can be extended using the Mobil extending section, see accessories.
The trailer is single-axle and non-braked. The delivery also includes a waterproof tarpaulin, protecting the bridge with the sawmill arm from rain during transport or parking. For secure fastening, the tarpaulin is fitted with grommets and a steel cable with ends allowing the use of a padlock. The maximum permissible speed is 130 km/h.
Ideal solution for family farms or small sawmilling companies. Simple hand feed into the cut and back. Height is adjusted using a hand crank with an adjustable scale.
In contrast to the standard version, the sawmill is equipped with a professional Honda 8.7 kW (11 HP) petrol engine. Sufficient engine power allows trouble-free processing of logs of large diameters in all applications without the possibility of using an electric motor. Overall low weight allows easier transport of the machine. Due to the higher weight and vibrations of the petrol engine the construction of the traveling bridge and sawmill arm is completely reinforced. It is designed primarily for cutting smaller volumes of lumber. Ideal solution for family farms or small sawmilling companies. Very simple hand feed into the cut and back. The control panel is placed on a mobile bridge of the sawmill arm. Thanks to that the operator has closer access to the workpiece when cutting.
The tensioning wheel system moves in a cast iron guide, which guarantees long service life and precision adjustment even with long-term use of the machine. The arm is fitted with aluminum running wheels with precise anti-vibration balancing. The circumference of the wheel has a recessed groove in which a replaceable rubber-textile V-belt is fitted, which forms the contact surface between the wheel and the saw blade.
The stability of the machine is based on very solid steel travel sections, which ensure optimum guidance of the sawmill arm bridge. The travel sections are fitted with tilting angle bars and log clamps/cam dogs.
The sawmill CTR 750 GX mobil uses standard saw blades 34-35 x 0,9-1,0 mm as with the fully professional models.
The CTR model series represents the latest trends in sawmill design, with special emphasis on maximum accuracy and long service life at minimum cost. The machines are designed in an original modular way, which allows easy replacement or adjustment of all main technical nodes and their individual parts. This significantly reduces maintenance costs in the long-term use of the machine and also reduces service times, thus reducing production downtime.
All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
| Max. log diameter | 750 mm |
| Max. opening betwen blade guides | 620 mm |
| Max. elevation of blade | 635 mm |
| Min. log height | 25 mm |
| Max. depth of cut | 255 mm |
| Max. log length | 4,2 m |
| Min. log length | 0,75 m |
| Length extending section | 2,25 m |
| Total length of the machine including the trailer | 6.489 mm |
| Saw blade motor | 8,7 kW (11 HP) |
| Sawblade | 4140 x 34-35 x 0,9-1,0 mm |
| Trailer weight | 385 kg |
| Total weight of the machine including the trailer | 661 kg |
| Extending section weight | 106 kg |
SPECIAL ACCESSORIES
-
Extending section Mobil 2,25 m
The cutting length of one section is 2.25 metres and the sections can be connected to each other. It can extend the total cutting length of mobile log band saws. The extending section consists of a very stable support structure that holds travel sections of the same design as those on the trailer. The Mobil extending section is fitted with four sturdy, continuously adjustable support legs. These ensure stability both when loading and handling the log and during the sawing itself. The Mobil extending section forms a separate unit. Due to its weight, it must not be transported on the trailer. It must be transported separately, either as a whole or disassembled.
-
Log loading kit (ramp with winch)
Allows logs to load on the trailer. Include a ramp and winch.
-
Additional winch holder
The auxiliary winch holder saves your time if you frequently change the length or conicalness of the log being cut. You no longer need to move the base winch holder.
-
Log turner - hook
When attached to the rope winch, it facilitates log turning.
-
Cant hook
Serves as help with manipulation with logs on machine frame.
-
Clamp with tilting angle bar
Additional clamping kit. It consists of the clamp and a tilting angle bar.
-
Additional clamp
-
Cam dog
For fast and easy squared lumber clamping.
-
Grease Gun
For regular maintenance of the machine according to the lubrication plan. Metal grease gun for 400g tubes. Equipped with a flexible pressure hose.
-
Synthetic Grease LV 2-3
400g tube for the grease gun.
CONSUMABLE PARTS
-
Running wheel V-belt SPB 1850
Driven Wheel V-belt B 17x1560 Lw -
Blade Roller Kit VK 750
Hardened roller, bearings, and shaft designed for a sawmill blade 35 mm.
-
Feed into the cut and back - hand-operated
Arm height adjustment - manual
Control panel - on a mobile bridge
Log handling - manual
Maximal log length: 4,2 mThe machine is mounted on a stable trailer that allows easy transport of the machine to the sawing location. The total weight of CTR 750 GX mobil with a trailer is 661 kg.
Check your vehicle’s registration card for the maximum permissible trailer weight!
The trailer is fitted with six robust, infinitely adjustable support legs. These ensure stability both when loading and handling the log and during the sawing itself. Easy loading of the log onto the loading area of the machine using a manual winch and a ramp for log loading (accessory). The trailer is homologated, including the complete machine. The standard length can be extended using the Mobil extending section, see accessories.
The trailer is single-axle and non-braked. The delivery also includes a waterproof tarpaulin, protecting the bridge with the sawmill arm from rain during transport or parking. For secure fastening, the tarpaulin is fitted with grommets and a steel cable with ends allowing the use of a padlock. The maximum permissible speed is 130 km/h.
Ideal solution for family farms or small sawmilling companies. Simple hand feed into the cut and back. Height is adjusted using a hand crank with an adjustable scale.
In contrast to the standard version, the sawmill is equipped with a professional Honda 8.7 kW (11 HP) petrol engine. Sufficient engine power allows trouble-free processing of logs of large diameters in all applications without the possibility of using an electric motor. Overall low weight allows easier transport of the machine. Due to the higher weight and vibrations of the petrol engine the construction of the traveling bridge and sawmill arm is completely reinforced. It is designed primarily for cutting smaller volumes of lumber. Ideal solution for family farms or small sawmilling companies. Very simple hand feed into the cut and back. The control panel is placed on a mobile bridge of the sawmill arm. Thanks to that the operator has closer access to the workpiece when cutting.
The tensioning wheel system moves in a cast iron guide, which guarantees long service life and precision adjustment even with long-term use of the machine. The arm is fitted with aluminum running wheels with precise anti-vibration balancing. The circumference of the wheel has a recessed groove in which a replaceable rubber-textile V-belt is fitted, which forms the contact surface between the wheel and the saw blade.
The stability of the machine is based on very solid steel travel sections, which ensure optimum guidance of the sawmill arm bridge. The travel sections are fitted with tilting angle bars and log clamps/cam dogs.
The sawmill CTR 750 GX mobil uses standard saw blades 34-35 x 0,9-1,0 mm as with the fully professional models.
The CTR model series represents the latest trends in sawmill design, with special emphasis on maximum accuracy and long service life at minimum cost. The machines are designed in an original modular way, which allows easy replacement or adjustment of all main technical nodes and their individual parts. This significantly reduces maintenance costs in the long-term use of the machine and also reduces service times, thus reducing production downtime.
All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
-
Max. log diameter 750 mm Max. opening betwen blade guides 620 mm Max. elevation of blade 635 mm Min. log height 25 mm Max. depth of cut 255 mm Max. log length 4,2 m Min. log length 0,75 m Length extending section 2,25 m Total length of the machine including the trailer 6.489 mm Saw blade motor 8,7 kW (11 HP) Sawblade 4140 x 34-35 x 0,9-1,0 mm Trailer weight 385 kg Total weight of the machine including the trailer 661 kg Extending section weight 106 kg -
SPECIAL ACCESSORIES
-
Extending section Mobil 2,25 m
The cutting length of one section is 2.25 metres and the sections can be connected to each other. It can extend the total cutting length of mobile log band saws. The extending section consists of a very stable support structure that holds travel sections of the same design as those on the trailer. The Mobil extending section is fitted with four sturdy, continuously adjustable support legs. These ensure stability both when loading and handling the log and during the sawing itself. The Mobil extending section forms a separate unit. Due to its weight, it must not be transported on the trailer. It must be transported separately, either as a whole or disassembled.
-
Log loading kit (ramp with winch)
Allows logs to load on the trailer. Include a ramp and winch.
-
Additional winch holder
The auxiliary winch holder saves your time if you frequently change the length or conicalness of the log being cut. You no longer need to move the base winch holder.
-
Log turner - hook
When attached to the rope winch, it facilitates log turning.
-
Cant hook
Serves as help with manipulation with logs on machine frame.
-
Clamp with tilting angle bar
Additional clamping kit. It consists of the clamp and a tilting angle bar.
-
Additional clamp
-
Cam dog
For fast and easy squared lumber clamping.
-
Grease Gun
For regular maintenance of the machine according to the lubrication plan. Metal grease gun for 400g tubes. Equipped with a flexible pressure hose.
-
Synthetic Grease LV 2-3
400g tube for the grease gun.
CONSUMABLE PARTS
-
Running wheel V-belt SPB 1850
Driven Wheel V-belt B 17x1560 Lw -
Blade Roller Kit VK 750
Hardened roller, bearings, and shaft designed for a sawmill blade 35 mm.
-
-